NOTE: For those of you participating in the live Webinar, the following link will open the documentation in a new browser window.
Reading the screen is done by pressing keys on the numeric keypad, or NUM PAD, sometimes in combination with other keys on the keyboard. When JAWS is loaded, the NUM LOCK is turned off, so that the keys represent movement keys, such as left arrow, right arrow, page up, and so on.
If you want to use your number pad for typing numbers, press NUM LOCK to toggle back and forth from screen reading mode to number input mode.
Some other keys which may be used include the following:
Why is it that people who use laptop computers with JAWS screen reading software need a different keyboard layout? The majority of people who use computers use a full-sized keyboard with a number pad. Most JAWS users read the screen with keystroke combinations using the number pad. When doing so, the INSERT key on the number pad is used as the JAWS Key, or modifier, to create keystrokes that are used in reading the screen. However, very few laptop systems have keyboards with a number pad, or if they do, it is not easily used. Therefore, many of these functions have been shifted to the main section of the laptop keyboard. Almost all laptops have an INSERT key, and it can be used in the same way for many reading commands as the INSERT key on a regular keyboard. However, without a number pad, some keystrokes are difficult or impossible to use.
Even if you use a desktop system or keyboard, you may want to try the laptop keyboard layout. When using the laptop keyboard layout, most of the commands are right at your fingertips so you do not need to continually switch your right hand to the number pad and then back to the main section of the keyboard. This is a really nice feature, and I know some experienced JAWS users who prefer laptop layout as opposed to just desktop layout! You really get the best of BOTH worlds if you learn the laptop layout with JAWS! If you use a regular keyboard with laptop layout, not only can you use the INSERT key as a JAWS Key, but you can also use the CAPS LOCK as a JAWS Key.
For more information on using JAWS with a laptop keyboard layout read the Laptop Keystrokes with JAWS DAISY book. This book can be found on the Training Downloads page. JAWS 10 or later users (or MAGic 11 or later users) can also use Check for Updates in the JAWS or MAGic Help menu to find DAISY books.
To begin reading with JAWS, put your middle three fingers on the numeric keypad, with your middle finger on the number 5, the one with the raised bump. Your pointer finger should be resting on the left arrow (NUM PAD 4) and your ring finger on the right arrow (NUM PAD 6). This is what we call the Home Row for your fingers on the Number Pad.
If you are using laptop layout, the pointer finger of your left hand should be on the letter F and the pointer finger of your right hand should be on the letter J. This way, you can use the little finger of your left hand to press the CAPS LOCK and use your right hand to access most of the other keys for reading when the CAPS LOCK is pressed at the same time.
Pressing the NUM PAD 5 speaks the current character, pressing the RIGHT ARROW moves to and reads the next character and pressing the LEFT ARROW moves to and reads the prior character.
Laptop users press CAPS LOCK+COMMA to read the current character, CAPS LOCK+M for prior character, and CAPS LOCK+PERIOD for next character.
To hear a character pronounced phonetically, press NUM PAD 5 twice quickly. As you continue to navigate with LEFT or RIGHT ARROW phonetic mode remains on. To exit phonetic mode, press NUM PAD 5 again one time.
Laptop users press CAPS LOCK+COMMA twice quickly to read the current character phonetically.
To read by words, tuck your thumb under and hold down the INSERT key (NUM PAD 0) while pressing any of the three keys above. Thus INSERT+NUM PAD 5 speaks the current word at the cursor, INSERT+NUM PAD RIGHT ARROW moves to and speaks the next word, and INSERT+NUM PAD LEFT ARROW moves to and speaks the prior word.
Laptop users press CAPS LOCK+K for current word, CAPS LOCK+J for prior word, and CAPS LOCK+L for next word.
To spell the current word, press INSERT+NUM PAD 5 twice quickly. Once you are in spelling mode JAWS and MAGic remain that way when moving to the prior word or next word. To exit spelling mode, press the SayWord keystroke again one time.
Laptop users press CAPS LOCK+K twice quickly to spell the current word.
To read by lines, press UP ARROW to move to and read the prior line, DOWN ARROW to move to and speak the next line, and INSERT+UP ARROW to read the current line.
Laptop users press CAPS LOCK+U to read the prior line, CAPS LOCK+O to read the next line, and CAPS LOCK+I to read the current line.
To read an entire document from wherever the cursor is located with one keystroke, press INSERT+DOWN ARROW. This keystroke is called the SayAll command, and is used frequently with JAWS. While using the SayAll command, you can also do the following:
To halt speech, press the CTRL key.
To read the prior sentence, press ALT+UP ARROW. To read the next sentence press ALT+DOWN ARROW. To read the current sentence, press ALT+NUM PAD 5.
Laptop users press CAPS LOCK+Y for the prior sentence, CAPS LOCK+H for the current sentence, and CAPS LOCK+N for the next sentence.
To read the prior paragraph, press CTRL+UP ARROW. To read the next paragraph press CTRL+DOWN ARROW. To read the current paragraph press CTRL+NUM PAD 5.
Laptop users use the same keys except for CAPS LOCK+CTRL+I to read the current paragraph.
There are many other keystrokes used for reading with JAWS or MAGic, but these are the basic ones. In addition, once you know the basic keystrokes for reading with JAWS or MAGic, these same keystrokes apply to all of the different cursors in JAWS. So whether you are reading with the PC Cursor, the JAWS Cursor, the Virtual Cursor, or the Invisible Cursor, they all use the same reading keystrokes.
Keyboard Help, INSERT+1 on the numbers row
Date, INSERT+F12 twice quickly
System Tray Icons, INSERT+F11
List of JAWS Managers, INSERT+F2
Screen Sensitive Help, INSERT+F1
List of Running Applications, INSERT+F10
EXERCISE: Open the Saint Pete practice document and use it with some of the reading commands we just discussed.
When you are finished practicing the JAWS reading commands, close the practice document and if asked to save any changes just answer "no."
One of the key concepts of how JAWS works relates to the multiple cursor system that has been developed.
The PC cursor is used for navigation and follows the focus of the system. The PC cursor is active when JAWS is first started, but if you switch to another cursor, you can press NUM PAD PLUS to make the PC cursor active again. Laptop users press CAPS LOCK+SEMICOLON.
The PC cursor is usually a vertical line that blinks in a document, indicating the insertion point. But it can also be represented by a highlighted bar in a menu, or a focus rectangle in a dialog box.
At other times the JAWS cursor takes over to perform actions that would normally be done using the mouse. The JAWS cursor is the mouse pointer. It can go places where the PC cursor cannot, for example, to the title bar at the top of many Windows applications. The JAWS cursor is used to manipulate the system mouse, read static text to which the PC cursor does not have access, and to access other parts of Windows to which the PC cursor cannot be moved. Press NUM PAD DASH to make the JAWS cursor active. Laptop users press CAPS LOCK+P to make the JAWS cursor active.
EXERCISE: Open the Saint Petersburg practice document, and demonstrate using both cursors to read text within a document.
Why is it important to have the JAWS cursor voice be different from the PC cursor voice?
EXERCISE: Open the JAWS Help About dialog box, and demonstrate how to read the static text there.
The JAWS cursor can be used to simulate clicking of mouse buttons. For more information, view the section "Cursor and Mouse Commands for Desktop Layout" in the JAWS Keystrokes HTML file.
NOTE: A copy of JAWS Keystrokes in accessible PDF format is also included for your convenience.
Text in a Web page is very much like the static text in a Windows status message. The PC cursor cannot move to this text, as there is no insertion point. The JAWS cursor can access this text, but this is not the most efficient way to access larger documents such as those often found on the World Wide Web. When using Internet Explorer 5 or higher (or programs that tie into the core components of Internet Explorer), or Adobe® Acrobat® files, JAWS provides the Virtual PC cursor to simulate an insertion point. This provides you the same functionality as that found in any word processing document. Text can be read by character, word, line, sentence, or paragraph, and text can be selected and copied to the Windows clipboard. The Virtual PC cursor is active by default in applications that support it. If you switch to another cursor, you can press NUM PAD PLUS to make the Virtual PC cursor active again. Laptop users press CAPS LOCK+SEMICOLON.
The Invisible cursor allows you to move around the screen without changing the position of the PC cursor or mouse pointer. You can use this cursor to read text and access options that you cannot move to with the PC cursor. You can also use the Invisible cursor to provide a quick overview of the information currently available on the screen. To activate the Invisible cursor, press NUM PAD MINUS twice quickly. Use the standard JAWS reading commands to move the Invisible cursor around the screen. Laptop users press CAPS LOCK+P twice quickly.
After completing these exercises, make sure the PC cursor is your active cursor by pressing NUM PAD PLUS. Close Saint Pete.rtf by pressing ALT+F4 and answer "No" to saving any changes.